The amount is based on the oxygen demand of wind combustible components of fuel is calculated, if the wind is not a fuel supply will not be sufficient fuel, kiln technology solutions for excess air excess air is a lot of heat into the flue gas, lime kiln technical problems, resulting in increased fuel and waste from the surface. Its air volume is generally calculated :( formula slightly) its pressure to be calculated depending on the type of kiln, different materials of different particle form resistance. Generally kiln resistance can 40--70 H2O / effective height (m) formula to calculate. But the original size of different fuels are also differences. Storing / preheating zone accumulator / preheating zone in the upper part of the kiln, the storage tape can accommodate 2-3 hours use of limestone, so that when limestone handling and feeding facilities for routine maintenance, and will not shut down. In the storage material / preheating zone at the top, the device has an exhaust gas suction beam, where the exhaust gas is extracted from the kiln. Beam across the kiln exhaust gas intake section Taicang lime kiln technology so that each part of the cross section of the suction force consistent with environmental protection lime kiln technology, enabling a uniform temperature gas rising upward. Exhaust gas out of the kiln, the first by a heat exchanger to cool, then dust bag, after the dust released into the atmosphere through the chimney. Taicang lime kiln technology, kiln construction, the new lime kiln technology is provided by LUOZHUANG Kiln Ltd. Linyi City blue sky. Taicang lime kiln technology, kiln construction, the new lime kiln technology is Luozhuang District, Linyi City, blue sky Kiln Ltd. (www.lyshihuiyao.com) (www.lyshihuiyao.com) this year introduced a new upgrade, the above picture is only for reference, please call the contact phone book page or image on to obtain the latest information, contact: Liu light.